Tankless Water Heater Descaling in Las Vegas Hard Water

Tankless water heaters are a great fit for a lot of Las Vegas homes: endless hot water, less wasted energy and more space in the garage. But they have one weak spot here, and it is our water. Las Vegas has some of the hardest water in the country, and the minerals in it build up as scale inside the heater. Descaling, also called flushing, is the maintenance that keeps a tankless unit working the way it should.

Why scale is such a problem in a tankless heater

A tankless heater pushes water through narrow passages in a heat exchanger and heats it in seconds. When hard water is heated, calcium and magnesium come out of the water and stick to those hot surfaces. Over time the scale acts like insulation, so the burner has to work harder to heat the same water, and the passages get narrower. More about Las Vegas hard water and your plumbing.

Signs your tankless heater needs descaling

  • Water takes longer to get hot, or never gets as hot as it used to.
  • Hot water swings between hot and cold in the shower.
  • Lower hot water pressure than cold.
  • The unit makes more noise, or you hear popping or ticking.
  • A scale or service warning on the display. Some brands show a specific code for scale buildup, so check your owner’s manual if a code appears.
  • Higher gas or electric bills with no change in how you use hot water.

How often to descale in Las Vegas

Most manufacturers recommend flushing a tankless water heater at least once a year, and more often in very hard water. In Las Vegas, a yearly flush is a good baseline for a home without a water softener. Your owner’s manual lists the schedule for your model, and following it can matter if you ever need a warranty claim.

What a descaling service involves

  1. Shut off the gas or power and the water to the unit.
  2. Connect a small pump and hoses to the service valves.
  3. Circulate a descaling solution through the heat exchanger to dissolve the scale.
  4. Flush with fresh water, clean the inlet filter screen and check for leaks.
  5. Restart the heater and test the temperature and flow.

A handy homeowner can do it with the right valves and supplies, but gas units, older installs without service valves, and units already throwing error codes are best left to a plumber.

How to make your tankless heater last

  • Stick to a flushing schedule. Scale is much easier to remove before it hardens into a thick layer.
  • Consider a water softener or scale-control system. Treating the water before it reaches the heater means far less buildup. Water softeners and filtration.
  • Keep the inlet filter clean. A clogged screen can cut flow and trigger errors.
  • Don’t ignore error codes. A heater that keeps shutting down is telling you something.

Need your tankless water heater flushed?

TPM Services descales, repairs and installs tankless water heaters across the Las Vegas valley. Family owned and licensed (NV License #0078472). Call 702-932-5755, answered 24/7. More about tankless water heaters.